Cape Town, South Africa

Make your first post here or feel the wrath of the Muppets.
User avatar
scootinon
Posts: 14
Joined: Tue May 03, 2016 10:55 pm

Re: Cape Town, South Africa

Post by scootinon »

Image

Sent from my Mi Max using Tapatalk

User avatar
scootinon
Posts: 14
Joined: Tue May 03, 2016 10:55 pm

Re: Cape Town, South Africa

Post by scootinon »

My maxi scoot had to go in for some major engine work, twice!
First time, oil in water, so while it was open did rings and valve stem seals, due to high oil consumption (1l/3000km),but after the job, oil consumption was worse(1l/1200km),so now, back in the shop, barrel and piston added plus a repeat of rings. I hope they do the job right.

Sent from my Mi Max using Tapatalk

User avatar
horobags
Benefactor
Posts: 3953
Joined: Thu Aug 05, 2010 1:57 pm
Current Ride: RE 350 classic vision 110
Location: scruffy old mancfester

Re: Cape Town, South Africa

Post by horobags »

icon_thumbs_up.gif vert nice..
Im not a gynecologist, but I dont mind taking a look.

kayz1
Benefactor
Posts: 3355
Joined: Tue Apr 06, 2010 1:14 pm
Current Ride: Scott X-ADV75 + bmw r90s + c70
Location: north Wales

Re: Cape Town, South Africa

Post by kayz1 »

Bad news that Peter, i hope as you say they do it correctly this time around.
Do they give you a loan bike while they do yours?
Lyn.

User avatar
scootinon
Posts: 14
Joined: Tue May 03, 2016 10:55 pm

Re: Cape Town, South Africa

Post by scootinon »

kayz1 wrote:Bad news that Peter, i hope as you say they do it correctly this time around.
Do they give you a loan bike while they do yours?
Lyn.
No such luck on a loan bike, lol.
I have a car as well, but that thing is super thirsty!
I hope the parts are in the country, or else it is an import story from Taiwan.

Sent from my Mi Max using Tapatalk

User avatar
scootinon
Posts: 14
Joined: Tue May 03, 2016 10:55 pm

Re: Cape Town, South Africa

Post by scootinon »

I just  got my scoot back with new barrel, piston, rings , exhaust cam rocker arm.
Plus used head, as the old head, the mackie showed me serious cam bearing housing wear on the exhaust cam side.
He showed me that oil does not get there in sufficient quantities, a design flaw for this model.

Anyways, my main question is :what is the correct running - in procedure for this engine 2010 efi kymco xciting 500ri.?

Another question : does the head need further torqing, like on a car?

Sent from my Mi Max using Tapatalk

kayz1
Benefactor
Posts: 3355
Joined: Tue Apr 06, 2010 1:14 pm
Current Ride: Scott X-ADV75 + bmw r90s + c70
Location: north Wales

Re: Cape Town, South Africa

Post by kayz1 »

Nice to have your machine back, i think you only have to bed the rings into the bore. I would ride it as normal but do not give it full power for a few hundred miles, work up to it...some will say thrash it from the off but me, i am old school and do it more slowly as in your case you only need take the
the rough edges off the bore so the rings will seal.
Good luck with it.
Lyn.

Post Reply