Hello from Idaho, USA.
I believe the EBC MD929D, front brake rotor for the 99-2002, Suzuki Burgman 250/400, will fit my Chinese motorcycle. However, I need to verify the diameter of the circle which contains the bolt hole centers. If anyone has a set of calipers, he can measure the distance between the centers of two, opposite bolt holes without removing the front wheel. If someone can make this measurement, I would truly appreciate receiving this information. Thank you.
Suzuki Burgman (99-2002) Front Brake Rotor
- The Bern
- Benefactor
- Posts: 1804
- Joined: Sat Oct 25, 2014 7:04 pm
- Current Ride: Silverwing 600
- Location: Telford
Re: Suzuki Burgman (99-2002) Front Brake Rotor
replied to the identicle post in the introductions section
Have wheels, will travel
- SpudRider
- Posts: 12
- Joined: Sat Oct 29, 2016 1:20 am
Re: Suzuki Burgman (99-2002) Front Brake Rotor
Thank you for both replies.
I always try to avoid duplicate posts. However, I originally attempted to post my question in this forum, but did not succeed. Therefore, I concluded I must place my first post in the Introduce Yourself Forum. After I successfully placed my first post, I decided to try posting again in this forum. I do not wish to clutter your forums, so I will refrain from more duplicate posts.
I have confirmed the outside diameter of the brake rotor and the inside diameter of the mounting flange. I have contacted EBC USA, but they could not provide me with the information I seek. I have also posted my question on the BurgmanUSA forum, but the Suzuki Burgman was not exported to the USA until after 2002.
I will now contact the EBC headquarters in the United Kingdom as well. Sometimes large companies are slow to reply, or will not reply at all to such inquiries. Therefore, I am hoping someone who owns a 99-2002 Suzuki Burgman will make the measurement for me.
I own a 2015 Zongshen RX3, which was sold in the United Kingdom as the Honley Venturer 250. However, I no longer see the bike listed on the Honley website. Here is a recent photograph of my motorcycle, which was taken in the bike's habitat of Idaho.
I always try to avoid duplicate posts. However, I originally attempted to post my question in this forum, but did not succeed. Therefore, I concluded I must place my first post in the Introduce Yourself Forum. After I successfully placed my first post, I decided to try posting again in this forum. I do not wish to clutter your forums, so I will refrain from more duplicate posts.
I have confirmed the outside diameter of the brake rotor and the inside diameter of the mounting flange. I have contacted EBC USA, but they could not provide me with the information I seek. I have also posted my question on the BurgmanUSA forum, but the Suzuki Burgman was not exported to the USA until after 2002.
I will now contact the EBC headquarters in the United Kingdom as well. Sometimes large companies are slow to reply, or will not reply at all to such inquiries. Therefore, I am hoping someone who owns a 99-2002 Suzuki Burgman will make the measurement for me.
I own a 2015 Zongshen RX3, which was sold in the United Kingdom as the Honley Venturer 250. However, I no longer see the bike listed on the Honley website. Here is a recent photograph of my motorcycle, which was taken in the bike's habitat of Idaho.
-
- Benefactor
- Posts: 3355
- Joined: Tue Apr 06, 2010 1:14 pm
- Current Ride: Scott X-ADV75 + bmw r90s + c70
- Location: north Wales
Re: Suzuki Burgman (99-2002) Front Brake Rotor
Ow! i do like that picture, my kind of ride to.
Lyn.
Lyn.
- SpudRider
- Posts: 12
- Joined: Sat Oct 29, 2016 1:20 am
Re: Suzuki Burgman (99-2002) Front Brake Rotor
Thank you, Lyn.
Here is another photograph, taken at Bear Lake, which is located on the Idaho/Utah border of the USA.
Here is another photograph, taken at Bear Lake, which is located on the Idaho/Utah border of the USA.
-
- Benefactor
- Posts: 921
- Joined: Thu Apr 16, 2009 5:06 pm
- Current Ride: Burgman 400 K5
- Location: Sunny Bournemouth
Re: Suzuki Burgman (99-2002) Front Brake Rotor
This site says it's 142mm between centres. Good luck!
https://www.ajsutton.co.uk/product/EBC/ ... GwodF2MMng
https://www.ajsutton.co.uk/product/EBC/ ... GwodF2MMng
I wake up every morning with a smile upon my face,
My natural exuberance spills out all over the place!
My natural exuberance spills out all over the place!
- SpudRider
- Posts: 12
- Joined: Sat Oct 29, 2016 1:20 am
Re: Suzuki Burgman (99-2002) Front Brake Rotor
Thank you, kind sir! You have confirmed this brake rotor will fit the front wheel of the Zongshen RX3.Whatsisname wrote:This site says it's 142mm between centres. Good luck!
https://www.ajsutton.co.uk/product/EBC/ ... GwodF2MMng