So just fit a new cam chain new head gasket
Got a haynes, I cannot find torque settings for head bolts
I think these haynes manuals ar sh;.te by the way
Anyone help me plz
400 /07 / torque the head down
-
- Posts: 32
- Joined: Sun Nov 29, 2015 6:42 pm
- Current Ride: 07 400
- Ralph
- Posts: 967
- Joined: Fri Jun 01, 2012 7:20 am
- Current Ride: Yamaha X-max 300 300
- Location: Near Fleetwood
Re: 400 /07 / torque the head down
Tighten the cylinder head bolts and nuts diagonally and
evenly.
• The head bolt tightening must be performed in two stages, initial
and final tightening.
#Cylinder head bolt
Initial tightening:25 N·m (2.5 kgf-m, 18.0 lb-ft)
Final tightening: 41 N·m (4.1 kgf-m, 29.5 lb-ft)
#Cylinder head nut (M8): 25 N·m (2.5 kgf-m, 18.0 lb-ft)
Cylinder head nut (M6): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
Cylinder nut : 10 N·m (1.0 kgf-m, 7.0 lb-ft)
evenly.
• The head bolt tightening must be performed in two stages, initial
and final tightening.
#Cylinder head bolt
Initial tightening:25 N·m (2.5 kgf-m, 18.0 lb-ft)
Final tightening: 41 N·m (4.1 kgf-m, 29.5 lb-ft)
#Cylinder head nut (M8): 25 N·m (2.5 kgf-m, 18.0 lb-ft)
Cylinder head nut (M6): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
Cylinder nut : 10 N·m (1.0 kgf-m, 7.0 lb-ft)
-
- Posts: 32
- Joined: Sun Nov 29, 2015 6:42 pm
- Current Ride: 07 400
Re: 400 /07 / torque the head down
Thats the one Ralf , many thanks bro
All the best jon
All the best jon
- Data
- Benefactor
- Posts: 3234
- Joined: Wed Feb 08, 2012 6:43 am
- Current Ride: Royal Enfield 350 Meteor
- Location: North Essex, UK
Re: 400 /07 / torque the head down
The torque settings for the head bolts are in the Haynes manual. You must have missed them! Easily done.
Probably not ugly enough for the 'Ugly Bunch'!
Been riding for 54 years & owned too many bikes to list here...
Been riding for 54 years & owned too many bikes to list here...