400K2 No Spark.

A whole section dedicated to the Suzuki Burgman
Post Reply
Posts: 5
Joined: Tue Oct 25, 2016 1:23 pm
Current Ride: Burgman AN400K2
400K2 No Spark.

Post by jimbaab » Tue May 29, 2018 4:01 pm

Hi All,
Hoping to pick all the brains out there clean, regarding the issue of Ignition.
No spark.
From the Haynes Manual, the coil seems ok using a good mutimeter.
Also from the manual, the ICU gives very few of the readings stated, with my meter set to Diode. Assumption, therefore, is that the ICU is Kaput. Anyone got experience in this area? It's an expensive result.

User avatar
Posts: 2096
Joined: Wed Feb 08, 2012 6:43 am
Current Ride: Vespa GTS300ie abs asr
Location: Starfleet Command, Engineering, Southern UK - I think!
Great Britain
Re: 400K2 No Spark.

Post by Data » Wed May 30, 2018 12:34 pm

Yes, it looks as if it's the icu then. Can't be much else if the spark plug and lead is ok and the battery is fine. And assuming yours is the K2 model as per your title of the thread. Also assuming everything is earthed ok, ie: battery, engine etc etc

Post Reply