400K2 No Spark.

A whole section dedicated to the Suzuki Burgman
Post Reply
jimbaab

400K2 No Spark.

Post by jimbaab »

Hi All,
Hoping to pick all the brains out there clean, regarding the issue of Ignition.
No spark.
From the Haynes Manual, the coil seems ok using a good mutimeter.
Also from the manual, the ICU gives very few of the readings stated, with my meter set to Diode. Assumption, therefore, is that the ICU is Kaput. Anyone got experience in this area? It's an expensive result.
Cheers.
J

User avatar
Data
Benefactor
Posts: 3216
Joined: Wed Feb 08, 2012 6:43 am
Current Ride: 2016 Vespa GTS300ie abs asr
Location: North Essex, UK

Re: 400K2 No Spark.

Post by Data »

Yes, it looks as if it's the icu then. Can't be much else if the spark plug and lead is ok and the battery is fine. And assuming yours is the K2 model as per your title of the thread. Also assuming everything is earthed ok, ie: battery, engine etc etc
Probably not ugly enough for the 'Ugly Bunch'! :lol:

Been riding for 54 years & owned too many bikes to list here...

Post Reply