400K2 No Spark.
Posted: Tue May 29, 2018 4:01 pm
Hi All,
Hoping to pick all the brains out there clean, regarding the issue of Ignition.
No spark.
From the Haynes Manual, the coil seems ok using a good mutimeter.
Also from the manual, the ICU gives very few of the readings stated, with my meter set to Diode. Assumption, therefore, is that the ICU is Kaput. Anyone got experience in this area? It's an expensive result.
Cheers.
J
Hoping to pick all the brains out there clean, regarding the issue of Ignition.
No spark.
From the Haynes Manual, the coil seems ok using a good mutimeter.
Also from the manual, the ICU gives very few of the readings stated, with my meter set to Diode. Assumption, therefore, is that the ICU is Kaput. Anyone got experience in this area? It's an expensive result.
Cheers.
J