top box 2018 650 exc.

A whole section dedicated to the Suzuki Burgman
Post Reply
Gurney
Posts: 9
Joined: Fri Sep 07, 2018 3:52 pm
Current Ride: 650 Burgman
Location: Ayrshire Scotland
Scotland
top box 2018 650 exc.

Post by Gurney » Thu Nov 15, 2018 4:10 pm

I have a 2018 650 burgman excecutive and would like your advice on fitting a Givi one.
Now i have seen a strip down of the back rest and fitting a Givi on youtube (USA) with the 400 earlier model. I can see that this is quite different from mine.
And also when the backrest is off and the rack for the box is on all the body work is exposed .

Comments please and or answers Thanks

Snail
Posts: 305
Joined: Tue Oct 03, 2017 2:51 pm
Current Ride: Burgman
Location: Gloucester
England
Re: top box 2018 650 exc.

Post by Snail » Thu Nov 15, 2018 5:21 pm

Hi, on my 2018 400, i had the genuine suzuki rack fitted by the dealer, then my givi v47 monolock box fits directly to it, no need for any givi adaptor plates, the rack is all steel and bolted to the frame of the bike passing through the tail plastic, dont know if yours would be similar, rack was £150

Snail

OldEssexman
Posts: 16
Joined: Sun Dec 10, 2017 9:14 am
Current Ride: 2017 650 Exec
EU Flag
Re: top box 2018 650 exc.

Post by OldEssexman » Fri Nov 16, 2018 4:33 am

I have a 2018 650 Exec and, when I bought it I had a Givi rack and 55l box fitted by the dealer. Included in the fitting kit for the rack is a spacer that covers the gap between the rack and the tail of the bike. All neat and tidy and looks 'factory'.

User avatar
Luckydave
Posts: 159
Joined: Tue Nov 29, 2016 3:08 am
Current Ride: Burgman 650 and others
England
Re: top box 2018 650 exc.

Post by Luckydave » Sun Nov 18, 2018 3:30 pm

I have a 2016 Executive with a Suzuki rack fitted,in my opinion a better looking item than the Givi one but if you want to fit side cases you’ll have to have a Givi rack fitted

Gurney
Posts: 9
Joined: Fri Sep 07, 2018 3:52 pm
Current Ride: 650 Burgman
Location: Ayrshire Scotland
Scotland
Re: top box 2018 650 exc.

Post by Gurney » Thu Nov 22, 2018 10:50 am

I don't think my reply got through .Just to say thanks guys for your input .it helped answer a few of my questions.

G


Post Reply