Page 37 of 37

Re: New Xmax 300

Posted: Thu Sep 12, 2019 11:36 am
by Ralph
Yamaha have held their hands up and are supplying another new front disc under warranty.

Re: New Xmax 300

Posted: Wed Sep 18, 2019 11:58 am
by eame64
Have any of you X-max 300 guys changed your standard seat to the comfort seat and if so is it worth it?

Re: New Xmax 300

Posted: Wed Sep 18, 2019 12:11 pm
by Ralph
Mines still on the standard seat, the 2017 ones had a different seat to the 2018 the comfort seat looks very like the 2018 seat but I have never
sat on one.

Re: New Xmax 300

Posted: Mon Oct 07, 2019 9:20 am
by Ralph
New disc as come complete with pads and new bolts going in for fitting a week Thursday tech is going to have a good look see if he can find a reason why it is doing it. On the 125,s were they have had the same it as been found that corrosion was building up behind the disc.

Re: New Xmax 300

Posted: Fri Oct 18, 2019 11:28 am
by Ralph
Second new disc fitted techy says that they can find nothing wrong except of course the warped disc,
all seems well will see how this one goes.

Re: New Xmax 300

Posted: Sat Oct 19, 2019 2:09 am
by Greyerbeard
My replacement disc is feeling a bit odd now...took it to be checked; they rode it and checked it with a dial gauge; took the caliper off and greased the pins and it's perfectly fine. We agreed to mutually keep an eye on it; there's a year left on the warranty yet so no problem really.
Yes a trusted dealer - Hammonds in Cirencester.

Re: New Xmax 300

Posted: Sat Oct 19, 2019 3:35 am
by Ralph
There must be something for it to affect just a few bikes, but it's a case as you say keep a eye on it
I wondered about the wheel being true but that is ok now wondering if the caliper could be a tuch
out of true but plenty of warranty left so it's wait n see.

Re: New Xmax 300

Posted: Sun Oct 20, 2019 8:43 am
by Ralph
Had a good look at mine today and all looks well, caliper is free to move as are the pistons,
every thing seems true, only thing I did notice was that the holes as in drilled disc holes
have very sharp edges, being very gentle with it till it beds in, interested in how yours goes on.

Re: New Xmax 300

Posted: Fri Dec 06, 2019 1:46 pm
by Ralph
I do the round britain rally, just had the results there were 249 enterents mostly on big turers
and trail bikes, my Xmax 300 was one of 3 entered one of which was in position 1 not bad for
a 300 scooter, any of the other 2 riders on here?