Just back £2.35 says made in Taiwan but look at photo lifetime guarantee not sure if B&Q would honour that but hey ho .Pay your money take your chance .Did click and collect save walking around searching for it .
B&Q 32mm socket
Re: B&Q 32mm socket
I'd have preferred a 6 side impact one but its not as you correctly say .Will it remove the nut Ill let you know when time comes .I'm well aware of the difference .I'll go for quick buzz with impact gun rather than standing on end of a breaker bar .Thanks for your concern and input .
Re: B&Q 32mm socket
I'm asking Santa for a rechargeable impact gun mine is 110 volt works okay but lugging transformer is a pain .
- smeghead
- Benefactor
- Posts: 2153
- Joined: Wed Oct 24, 2012 2:58 am
- Current Ride: GTS 300 Touring
- Location: Doncaster
-
- Benefactor
- Posts: 7112
- Joined: Wed Apr 08, 2009 3:50 pm
- Current Ride: T-max mk6
- Location: Teesside UK
-
- Benefactor
- Posts: 1446
- Joined: Tue Jul 30, 2013 8:03 am
- Current Ride: Aprilia srv 850
Re: B&Q 32mm socket
B&Q will honour any warranty as long as there's a receipt and you have not beat it to death with a sledge hammer
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
- SkuTorr
- Benefactor
- Posts: 773
- Joined: Wed Oct 09, 2013 6:05 pm
- Current Ride: Tmax Mk3
- Location: Coarsegold, California USA (By Yosemite)
- Contact:
Re: B&Q 32mm socket
Here he is!
2009 Tmax with OODLES of upgrades!
2009 Majesty 400 (sold)
2007 Aprilia Mojito 150 (sold)
2009 Majesty 400 (sold)
2007 Aprilia Mojito 150 (sold)
-
- Benefactor
- Posts: 1216
- Joined: Wed Jan 06, 2016 7:58 am
- Current Ride: Honda SH300i
- Location: Balloch Scotland
Re: B&Q 32mm socket
Which one is Meldrew - I’m guessing the devious auld bugger to the left
-
- Posts: 93
- Joined: Mon Aug 08, 2016 12:58 pm
- Current Ride: Burgman 650
Re: B&Q 32mm socket
Bargain indeed if it does the job but as suggested use with care in case you fu*k the Hex on nut up.Being a tight arse I buy used 6 point sockets at an autojumble for a quid,I’d use a 1 1/4†on a 32 mm wheel nut as it would be a good tight fit