Page 1 of 4

B&Q 32mm socket

Posted: Wed Oct 10, 2018 7:00 am
by Deleted User 7077
Just back £2.35 says made in Taiwan but look at photo lifetime guarantee not sure if B&Q would honour that but hey ho .Pay your money take your chance .Did click and collect save walking around searching for it .

Image



Image

Re: B&Q 32mm socket

Posted: Wed Oct 10, 2018 7:15 am
by Deleted User 7077
Rocking the post images now off chinese smart phone .

Re: B&Q 32mm socket

Posted: Wed Oct 10, 2018 9:29 am
by Deleted User 7077
I'd have preferred a 6 side impact one but its not as you correctly say .Will it remove the nut Ill let you know when time comes .I'm well aware of the difference .I'll go for quick buzz with impact gun rather than standing on end of a breaker bar .Thanks for your concern and input .

Re: B&Q 32mm socket

Posted: Wed Oct 10, 2018 9:35 am
by Deleted User 7077
I'm asking Santa for a rechargeable impact gun mine is 110 volt works okay but lugging transformer is a pain .

Re: B&Q 32mm socket

Posted: Wed Oct 10, 2018 10:14 am
by smeghead
Meldrew wrote: Wed Oct 10, 2018 10:10 am There is no Santa! :(
Yes there is! He lives in York and rides a Silverwing!

Re: B&Q 32mm socket

Posted: Wed Oct 10, 2018 10:16 am
by MrGrumpy
smeghead wrote: Wed Oct 10, 2018 10:14 am
Meldrew wrote: Wed Oct 10, 2018 10:10 am There is no Santa! :(
Yes there is! He lives in York and rides a Silverwing!
What a nightmare thought...Meldrew as Santa. Soon get the kids saying they don't believe in him! Those that aren't in therapy anyway.

Re: B&Q 32mm socket

Posted: Wed Oct 10, 2018 1:10 pm
by Ferret
B&Q will honour any warranty as long as there's a receipt and you have not beat it to death with a sledge hammer


Sent from my iPad using Tapatalk

Re: B&Q 32mm socket

Posted: Wed Oct 10, 2018 7:07 pm
by SkuTorr
Here he is! :lol:
1221_fea_rpe_twistedxmas-1.jpg

Re: B&Q 32mm socket

Posted: Wed Oct 10, 2018 7:39 pm
by Symcity
Which one is Meldrew - I’m guessing the devious auld bugger to the left

Re: B&Q 32mm socket

Posted: Thu Oct 11, 2018 2:13 am
by Davefirestorm
Bargain indeed if it does the job but as suggested use with care in case you fu*k the Hex on nut up.Being a tight arse I buy used 6 point sockets at an autojumble for a quid,I’d use a 1 1/4” on a 32 mm wheel nut as it would be a good tight fit