NC750X DCT

Chat about all makes of Maxi scoot here!
Post Reply
User avatar
EvilRacer329
Posts: 204
Joined: Thu Jul 11, 2019 6:35 am
Current Ride: Yamaha T-Max DX

Re: NC750X DCT

Post by EvilRacer329 »

The T-Max *is* a lot of fun, that's for sure...and I do hate spoked wheels...

Why is your T-Max stuck in a workshop?

Nick

Online
MrGrumpy
Benefactor
Posts: 7109
Joined: Wed Apr 08, 2009 3:50 pm
Current Ride: T-max mk6
Location: Teesside UK

Re: NC750X DCT

Post by MrGrumpy »

EvilRacer329 wrote: Mon Sep 16, 2019 12:53 pm The T-Max *is* a lot of fun, that's for sure...and I do hate spoked wheels...

Why is your T-Max stuck in a workshop?

Nick
Yes, the spoked wheels would another piss-off - I'm not that anal about keeping scoots clean, but cleaning spoked wheels would be a nightmare! Enough reason to choose the Integra rather than X-ADV on that alone!

You must have forgotten my tale of woe with the Tmax.... on the way back from the drive belt recall, a bearing somewhere between the CVT and the final drive failed causing an immediate seizure of the rear wheel - fortunately I was only 10m short of my house and only doing 10mph when it happened! So it got transported back to the same dealership I'd just ridden from, and took a whole FOUR MONTHS to get sorted. Still don't know quite why it took so long - apparently the failure was unprecedented and Yamaha Japan got involved, and then parts had to got from Japan rather than the European parts centre in the Netherlands. After the CVT upgrade, its now working as it should for the first time in well over a year. Even my off-throttle surging issue is drastically reduced, presumably due to the remapping at the recall.

User avatar
EvilRacer329
Posts: 204
Joined: Thu Jul 11, 2019 6:35 am
Current Ride: Yamaha T-Max DX

Re: NC750X DCT

Post by EvilRacer329 »

Oh snap, I think that must've happened before I joined the forum! I once had something similar happen on an old Peugeot Trekker 50, but 4 months?! I'd be livid! I'm glad you've got it back again now, and extremely glad you weren't hurt when the thing seized up. Scary stuff...

Nick

Online
MrGrumpy
Benefactor
Posts: 7109
Joined: Wed Apr 08, 2009 3:50 pm
Current Ride: T-max mk6
Location: Teesside UK

Re: NC750X DCT

Post by MrGrumpy »

EvilRacer329 wrote: Tue Sep 17, 2019 5:50 am extremely glad you weren't hurt when the thing seized up. Scary stuff...
I don't want to think about what would have happened if it'd failed at 80 in the outside lane of the M25!!! Presumably that was part of the reason why Yamaha Japan got involved....

SH125Paul
Benefactor
Posts: 1983
Joined: Fri May 28, 2010 7:03 am
Current Ride: SH125 - NC750X DCT
Location: SE London

Re: NC750X DCT

Post by SH125Paul »

So, getting my NC thread back on track... :?

Saturday morning, Early, Frosty, Foggy and Fresh saw my return back to the land of Doble's...
600 mile service (at 735 miles...) had to wait for a Saturday rather than take time off work...
Engine Oil Filter, DCT Filter and 10w30 Fully Synthetic Oil according to the invoice,
Oh and a wipe over with the oily rag that is listed as Consumables and/or Environmental Disposal
£140ish rather than £160ish as charged 1 hr labour @ £65+vat rather than the usual 1.2 for the DCT model...
We are good to go again! Next stop 8000 miles! - None of the usual Dearly quoted 'yearly' nonsense...
From the Honda Owners Handbook the only think listed as 'Annual' is an oil change...
So it will get some of Castrol's Finest 10w30 (care of Halfords and a Trade Card) at the yearly interval, which should be at about 4000 miles, so an interim oil change, but in my garage, rather than gracing the Doble's workshop...

Hoping for some Dry Time to get out on the NC, I do like the DCT!
SH (Dobbin) is plodding along on Commuter Duties, currently at 31500 miles...
So an oil change in a 1000 miles, be a nice Christmas Present for it... and an excuse to get out in the garage!

User avatar
Funkycowie
Admin
Posts: 4600
Joined: Sat Mar 21, 2009 8:23 am
Current Ride: Honda NC750x
Location: Essex, UK.

Re: NC750X DCT

Post by Funkycowie »

I thought it was 10w40 for the NC?
ImageImageImageImage
Past Bikes: Piaggio B125, Gilera Nexus 500, TMax MK3 in White, TMax MK3 in Yellow, TMax MK3 in Yellow, Honda NC750x in Blue...

Symcity
Benefactor
Posts: 1216
Joined: Wed Jan 06, 2016 7:58 am
Current Ride: Honda SH300i
Location: Balloch Scotland

Re: NC750X DCT

Post by Symcity »

SH125Paul wrote: Mon Dec 02, 2019 8:31 am So, getting my NC thread back on track... :?
Engine Oil Filter, DCT Filter and 10w30 Fully Synthetic Oil according to the invoice
What’s a DCT filter

SH125Paul
Benefactor
Posts: 1983
Joined: Fri May 28, 2010 7:03 am
Current Ride: SH125 - NC750X DCT
Location: SE London

Re: NC750X DCT

Post by SH125Paul »

Symcity wrote: Mon Dec 02, 2019 12:50 pm
SH125Paul wrote: Mon Dec 02, 2019 8:31 am So, getting my NC thread back on track... :?
Engine Oil Filter, DCT Filter and 10w30 Fully Synthetic Oil according to the invoice
What’s a DCT filter
I've got the Dual Clutch Transmission (DCT) / Auto Model...
It has a Canister Oil filer low down by the sump, and a second, small paper element oil filter higher up by the clutch...
The Standard model only has the Canister Filter by the sump...

SH125Paul
Benefactor
Posts: 1983
Joined: Fri May 28, 2010 7:03 am
Current Ride: SH125 - NC750X DCT
Location: SE London

Re: NC750X DCT

Post by SH125Paul »

Funkycowie wrote: Mon Dec 02, 2019 11:36 am I thought it was 10w40 for the NC?
10w30 quoted as the correct viscosity for the DCT...
Some have mentioned 'Gear Changing Issues, or Creap etc. when 10w40 is used depending on temperature etc.
I would of imagined 10w40 to be fine for our climate and wide spread of temp...
But when both are available...

SH is also quoted as 10w30, although I have been 5w40 Halfords Fully-ing the SH... 'specially at winter time...

Online
MrGrumpy
Benefactor
Posts: 7109
Joined: Wed Apr 08, 2009 3:50 pm
Current Ride: T-max mk6
Location: Teesside UK

Re: NC750X DCT

Post by MrGrumpy »

SH125Paul wrote: Tue Dec 03, 2019 6:23 am e]

10w30 quoted as the correct viscosity for the DCT...
Some have mentioned 'Gear Changing Issues, or Creap etc. when 10w40 is used depending on temperature etc.
Please explain to someone who doesn't know very much about the DCT why you could get creep with different oils - what sort of clutch does the DCT have (not the internal clutches obviously)? - I presume it doesn't have a centrifugal clutch like most scooters with CVT, or does it? :?:

Post Reply