Put Dr Pulley 16g rollers in last weekend... acceleration is increased, the clutch bites quicker, not sure if the mpg has improved because I have been enjoying the acceleration a little too much if you know what I mean
The difference is very noticeable
Dr Pulley Rollers 16g - Holy acceleration Batman!
- Funkycowie
- Admin
- Posts: 4606
- Joined: Sat Mar 21, 2009 8:23 am
- Current Ride: Honda NC750x
- Location: Essex, UK.
- TmaX9
- Posts: 633
- Joined: Thu Apr 09, 2009 5:15 pm
- Current Ride: 04 and 54 X9 500 Evos
- Location: Fylde Coast Lancashire
Re: Dr Pulley Rollers 16g - Holy acceleration Batman!
I haven't found ther MPG to be affected at all on my X9.
It seems like it should be, but I think the lower gearing during acceleration means that as long as you aren't hammering it all the time, it is working less hard therefore using less fuel.
The extra performance if used will cost more in fuel, but if you ride as you did before most of the time, only using the new 'boost' occasionally, you won't see any higher cost for fuel. 58-60mpg is still average for commuting on my yellow X9 with the 8 roller 16g DrPulleys, and the white X9 with stock 6 roller 28g DrPulleys only does 50-54mpg although that ECU is still the older mapping too.
It seems like it should be, but I think the lower gearing during acceleration means that as long as you aren't hammering it all the time, it is working less hard therefore using less fuel.
The extra performance if used will cost more in fuel, but if you ride as you did before most of the time, only using the new 'boost' occasionally, you won't see any higher cost for fuel. 58-60mpg is still average for commuting on my yellow X9 with the 8 roller 16g DrPulleys, and the white X9 with stock 6 roller 28g DrPulleys only does 50-54mpg although that ECU is still the older mapping too.
- MjW
- Posts: 503
- Joined: Fri Mar 16, 2012 3:34 am
- Current Ride: TMax 2009 ABS
- Location: Sweden
Dr Pulley Rollers 16g - Holy acceleration Batman!
Sounds great! I'm gonna fit the 15g ones hopefully in April. It'd be interesting to see the difference from stock.
-
- Benefactor
- Posts: 1983
- Joined: Fri May 28, 2010 7:03 am
- Current Ride: SH125 - NC750X DCT
- Location: SE London
Re: Dr Pulley Rollers 16g - Holy acceleration Batman!
Got my Dr Pulley Rollers and sliders the other day, just waiting on the belt, and some warmer weather...
-
- Benefactor
- Posts: 4898
- Joined: Fri Aug 24, 2012 3:14 pm
- Current Ride: Daelim S250 Advance
- Location: orpington kent
Re: Dr Pulley Rollers 16g - Holy acceleration Batman!
there german dr pulley website posts were un favourable for the sliders so i did not get them just fitted new stock ones.
I cant seem to remember.. I don't know where I'm going, but I'm on my way.