Hello from Idaho, USA.

I believe the EBC MD929D, front brake rotor for the 99-2002, Suzuki Burgman 250/400, will fit my Chinese motorcycle. However, I need to verify the diameter of the circle which contains the bolt hole centers. If anyone has a set of calipers, he can measure the distance between the centers of two, opposite bolt holes without removing the front wheel. If someone can make this measurement, I would truly appreciate receiving this information. Thank you.

replied to the identicle post in the introductions section

Thank you for both replies.

I always try to avoid duplicate posts. However, I originally attempted to post my question in this forum, but did not succeed. Therefore, I concluded I must place my first post in the Introduce Yourself Forum. After I successfully placed my first post, I decided to try posting again in this forum. I do not wish to clutter your forums, so I will refrain from more duplicate posts.

I have confirmed the outside diameter of the brake rotor and the inside diameter of the mounting flange. I have contacted EBC USA, but they could not provide me with the information I seek. I have also posted my question on the BurgmanUSA forum, but the Suzuki Burgman was not exported to the USA until after 2002.

I will now contact the EBC headquarters in the United Kingdom as well. Sometimes large companies are slow to reply, or will not reply at all to such inquiries. Therefore, I am hoping someone who owns a 99-2002 Suzuki Burgman will make the measurement for me.

I own a 2015 Zongshen RX3, which was sold in the United Kingdom as the Honley Venturer 250. However, I no longer see the bike listed on the Honley website. Here is a recent photograph of my motorcycle, which was taken in the bike's habitat of Idaho.

Ow! i do like that picture, my kind of ride to.
Lyn.

Thank you, Lyn.

Here is another photograph, taken at Bear Lake, which is located on the Idaho/Utah border of the USA.

This site says it's 142mm between centres. Good luck!

https://www.ajsutton.co.uk/product/EBC/ ... GwodF2MMng

Whatsisname wrote:This site says it's 142mm between centres. Good luck!

https://www.ajsutton.co.uk/product/EBC/ ... GwodF2MMng

Thank you, kind sir! You have confirmed this brake rotor will fit the front wheel of the Zongshen RX3.