They do. Quite a bit more dosh though, at Aus$14k
https://peugeotmotocycles.com.au/model/metropolis-400/
Tricity 300
- StephenC
- Benefactor
- Posts: 2600
- Joined: Sun Apr 12, 2009 6:24 am
- Current Ride: Kymco DT X360
- Location: Essex
Re: Tricity 300
Expert in Close Quarters Combat Filtering
Can is not the same as Should
Can is not the same as Should
- spdtwn
- Posts: 67
- Joined: Wed Apr 15, 2009 7:56 pm
- Current Ride: Vespa Sei Giorni HPE + MP3 250
- Location: Auckland, New Zealand
Re: Tricity 300
There is a Peugeot agent who carry the tiddlers and would indent a Metropolis on special order but as StephenC says 'lot of dosh'. Plus having the only one in NZ ....
I appreciate your concern re cost of MP3 maintenance. To date the major components I have replaced have been the 'tilt-lock' motor & potentiometer; ECU; fuel-pump; fuel-injector and both steering taper-roller bearings. Plus the usual belt and variator components. All requiring removal of acres of plastic! Thankfully I have the space and time to do the work. All this in 40,500km. Maybe I got a Monday morning model!
I appreciate your concern re cost of MP3 maintenance. To date the major components I have replaced have been the 'tilt-lock' motor & potentiometer; ECU; fuel-pump; fuel-injector and both steering taper-roller bearings. Plus the usual belt and variator components. All requiring removal of acres of plastic! Thankfully I have the space and time to do the work. All this in 40,500km. Maybe I got a Monday morning model!