What have you done to your Scooter today?

Post by **SH 300i Gr.** » Sun Apr 21, 2013 1:50 pm

Put a pair of Michelin city grip on

Send from my HTC Wildfire S
ROM. Wildchild V3.3

Post by **tallpaul** » Mon Apr 22, 2013 8:12 pm

Fitted a new belt and rollers on the xmax when I got in from work.
The old rollers didn't seem that bad tbh, considering its done 26000 miles.

Post by **Brubaker** » Mon Apr 22, 2013 10:15 pm

I swapped Silverwings with Meldrew for the ride from the Rheged Centre at Penrith in Cumbria, over the A66 to Scotch Corner services in County Durham. We had a coffee then got back on our own scooters for the ride back home to York.

Post by **cyco** » Mon Apr 22, 2013 11:40 pm

I thought about washing it, I took it to the shops, and that's about it!

Post by **SH125Paul** » Tue Apr 23, 2013 10:40 am

Over a long W/E... My CCM R30 Supermoto got new Pirelli Diablo Rosso II Tyres F & R, Chain Clean & Re-lube, Oil & Filter Change, Front Brake Fluid Change, Front & Rear Brake Caliper & Pad Clean & Re-Grease etc, General clean up as its been in hibernation for 6 months...
Upon putting the front wheel back in have noticed a distinct notch in the steering head bearings - so its gonna need a front end strip and new bearings... bearings etc on order, hopefully get it sorted over another 'long' next weekend...

Scooter got a wash... it had a sort out of Belt & Dr Pulleys, Brakes and Oil at the begining of the month....

pikey · Post by **pikey** » Tue Apr 23, 2013 11:58 am

Took some photos and walk around video and put advert on gumtree while sun was shining

Post by **Big Den** » Tue Apr 23, 2013 12:11 pm

Made a clutch holding tool out of a door closer mechanism and finally loosened off the 24mm nuts on the clutch and variator

Post by **MjW** » Tue Apr 23, 2013 2:46 pm

Have thought of it a lot. :/

On the move with Tapatalk

Post by **MT606** » Tue Apr 23, 2013 3:20 pm

Gave her a damn good thrashing! no birch branch was harmed in said activity

Post by **poldark** » Tue Apr 23, 2013 3:32 pm

Big Den wrote:Made a clutch holding tool out of a door closer mechanism and finally loosened off the 24mm nuts on the clutch and variator

Got any pics?

What have you done to your Scooter today?

Re: ÃƒÅ½Ã¢â‚¬ËœÃƒÂÃ¢â€šÂ¬: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?