What have you done to your Scooter today?

[richie the 1st]

Richie, when my CB500x went in for it's first service i asked about this Very High cost of an oil and filter change They told me it is NOT written in stone that the tappets HAVE to be done it is only Honda asking the dealers to keep an eye on the tappet with it being a New engine design. They only have to listen to them and if a bit clunky to adjust them. My service was £90..and it's a crackin little machine.
Lyn.

kayz1..What was the dealer..????

[kayz1]

Richie, when my CB500x went in for it's first service i asked about this Very High cost of an oil and filter change They told me it is NOT written in stone that the tappets HAVE to be done it is only Honda asking the dealers to keep an eye on the tappet with it being a New engine design. They only have to listen to them and if a bit clunky to adjust them. My service was £90..and it's a crackin little machine.
Lyn.

kayz1..What was the dealer..????

Colwyn Bay Motorcycles..

[chippie]

Dual headlight mod,wired sat/nav in and connected a battery charging plug.

[Taipan]

Fitted a Givi Airflow and am just about to fit new pads front and rear.

[MjW]

Dual headlight mod,wired sat/nav in and connected a battery charging plug.

Nice mods. I'll look into the dual headlight one. No idea how difficult it is or how it works but it looks very nice.


On the move with Tapatalk

[SH 300i Gr.]

Made tools to help me with service of the cvt

uploadfromtaptalk1383108476639.jpg

And bought a new newfren clutch full set with Springs only 43 euro
The oem cost 63 euro only the counter plates
Send from my HTC

[chippie]

Fitted a hugger to the T-Max.

[mottza]

Thought about taking the x9 out but was too windy.

[michaelphillips]

changed the dr pulleys.. i had in 24 gms yet after i fitted the rear contra spring, they struggled with the polini contra spring in opening the rear pulley to get the belt down, the scoot was fine at normal driving yet at motorway speeds they could not get the belt deep in rear... so bought 28gm dr pulleys, fitted them yet after a week and 3mpg less the slight vibes i get through the handlebars is raking havoc with me old hands so this morning i split the mix of half 24gm and half 28 gm dr pulleys so in effect have 26gm dr pulleys... no vibes now and happy again

[FlyRay]

Handguard (knuckle protector) fitted to my Majesty.