What have you done to your Scooter today?

Post by **kayz1** » Sun Mar 08, 2015 11:00 pm

nice to be able to see what it looks like and not those factory prints

Will the forks pass the MOT do you think!

PS: that choke leave is from an old tiger100 so don't sling it out if you do not use it

Post by **kayz1** » Sun Mar 08, 2015 11:04 pm

Very well done Sir, but i think you it wrong, that is not a stand foot that is an air brake

Deleted User 4154 · Post by **Deleted User 4154** » Sun Mar 08, 2015 11:24 pm

kayz1 wrote:nice to be able to see what it looks like and not those factory prints
Will the forks pass the MOT do you think!

Yes, for sure - the slidey bits are at the top under the fork shrouds

I'm just going to clean those lowers up and spray them silver, along with the rims.

kayz1 wrote:PS: that choke leave is from an old tiger100 so don't sling it out if you do not use it

No, it's definitely keeping that! I can mount it on the top legshield bracket. If we ever encounter any Russian Iron rivet counters they will be well confused

Post by **michaelphillips** » Mon Mar 09, 2015 4:36 pm

Fitted heli-bars to the cbr250r this morning, well took 4 hrs as could not for the life of me get the bar end weight mechanism out of the standard bars, finally did it

what a difference.. there 1and 3/4 inch higher and 1and 1/2 inch further back than stock bars. will be taking her for the mot tomorrow so will review after tomoz, stock pic here which shows them higher yet you dont get the view of them nearer , but happy when i sat on her,

Post by **SH125Paul** » Mon Mar 09, 2015 5:59 pm

Where do you MOT? - I go to Lockyer motors - Skibbs Lane, Chelsfield...

Post by **michaelphillips** » Mon Mar 09, 2015 6:21 pm

XMax400Paul wrote:Where do you MOT? - I go to Lockyer motors - Skibbs Lane, Chelsfield...

same here paul, always end up having a good chat

Post by **Funkycowie** » Mon Mar 09, 2015 7:59 pm

thought I fixed the front upper LEDS Sunday as one set stopped working having removed the front shield at few weeks ago... tested and all good... installed the front shield before work to find they no worky

YouTube · Post by **mottza** » Thu Mar 12, 2015 1:54 pm

mottza wrote:Broke it yesterday and fixed it today. Just need to get some screws and clips from the stealer and the last panels can be put on.

Will pick up the bits this afternoon and have her back on the road by the weekend.

Post by **Dave Weller** » Thu Mar 12, 2015 7:24 pm

Put a Givi small screen on the Beverly, it's only about 50mm taller than existing, but it's enough to quieten the buffeting noise. So probably worth it, although mirrors are not as clear, maybe I can reuse the original stays. I can now use the central fixing bolt to mount the sat-nav.

Post by **MjW** » Sat Mar 21, 2015 11:49 am

Moved it to the back and took the car to work instead. #suddensnow

What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

Re: What have you done to your Scooter today?

What have you done to your Scooter today?