Raven cafe 25/3 this Wednesday

[pikey]

Meeting Lyn at cafe 1030 for breaky if anyone not working and fancies it .

[The Bern]

Yay breakkie

Hey Lyn, if there's time can you see if you have a bit of ally' 120 mm (ish) x 50 mm (ish) x 20 mm (a bit thicker will be ok) please, I really should finish off the walnut cracker I started making last year if you got something about that size message me what I owe you bud

[kayz1]

Yay breakkie

Hey Lyn, if there's time can you see if you have a bit of ally' 120 mm (ish) x 50 mm (ish) x 20 mm (a bit thicker will be ok) please, I really should finish off the walnut cracker I started making last year if you got something about that size message me what I owe you bud

Buddy Ekk! i forgot all about it SORRY, that was months ago will check in a bit when making Julian's spacer...
Hissing down here rain hale wind....tis the end of the world

[Pjfdinosaur]

Will try to make this if its not issing down are you going Bern?

[pikey]

Weather forcast good for Whitchurch partly sunny

[kayz1]

Yay breakkie

Hey Lyn, if there's time can you see if you have a bit of ally' 120 mm (ish) x 50 mm (ish) x 20 mm (a bit thicker will be ok) please, I really should finish off the walnut cracker I started making last year if you got something about that size message me what I owe you bud

Carved a lump of Ali down to size for you, left it a tiny bit over on length and height so you can get the milling marks out...only had a 3/8 roughing cutter as i had to take 3/4 off it.
Lyn. Ow! it's around 123mmx50x20.3...

[The Bern]

Will try to make this if its not issing down are you going Bern?

Yes Phil you wanna come here for a cuppa before heading off bud ?

[The Bern]

Yay breakkie

Hey Lyn, if there's time can you see if you have a bit of ally' 120 mm (ish) x 50 mm (ish) x 20 mm (a bit thicker will be ok) please, I really should finish off the walnut cracker I started making last year if you got something about that size message me what I owe you bud

Carved a lump of Ali down to size for you, left it a tiny bit over on length and height so you can get the milling marks out...only had a 3/8 roughing cutter as i had to take 3/4 off it.
Lyn. Ow! it's around 123mmx50x20.3...

Cheers bud

[Alanzzg]

Sorry Julian, working but hope to catch up with you soon

[pikey]

No problem Alan unfortunately can't come to air ambulance run now as have Vespa Black Country meet same day.