Sh300i

Chat about all makes of Maxi scoot here!
Symcity
Benefactor
Posts: 1216
Joined: Wed Jan 06, 2016 7:58 am
Current Ride: Honda SH300i
Location: Balloch Scotland

Sh300i

Post by Symcity »

Went to Ayrshire today to have a gander at a 2012 Honda sh300i with only 3628 miles on the odometer - to say that I was disappointed is an understatement - the rear shocks were covered in rust - the swing arm had been painted black to conceal the corrosion - front fork seals were perished - all in all definitely not worth the £2995 asking price by this Honda dealership

User avatar
horobags
Benefactor
Posts: 3953
Joined: Thu Aug 05, 2010 1:57 pm
Current Ride: RE 350 classic vision 110
Location: scruffy old mancfester

Re: Sh300i

Post by horobags »

I think its the way they are stored, or where they are stored. My 2011 with 3k is mint, with just some light rust at the bottom of the shocks which polished out. Even the frame under the tuppa ware is mint.
Store a scoot away after a winter ride and it will start to corrode.
Im not a gynecologist, but I dont mind taking a look.

User avatar
horobags
Benefactor
Posts: 3953
Joined: Thu Aug 05, 2010 1:57 pm
Current Ride: RE 350 classic vision 110
Location: scruffy old mancfester

Re: Sh300i

Post by horobags »

Are you looking for another one Symcity???
Im not a gynecologist, but I dont mind taking a look.

Symcity
Benefactor
Posts: 1216
Joined: Wed Jan 06, 2016 7:58 am
Current Ride: Honda SH300i
Location: Balloch Scotland

Re: Sh300i

Post by Symcity »

horobags wrote: Wed Oct 02, 2019 2:53 am Are you looking for another one Symcity???
I’m approaching 18K miles and whilst the bike is running fine I’d perhaps be looking for a fine low milage example which has been well looked after - age not really a dealbreaker

User avatar
Taipan
Benefactor
Posts: 962
Joined: Wed Apr 08, 2009 1:47 pm
Current Ride: Honda NC700X DCT Tmax mk2
Location: Essex!

Re: Sh300i

Post by Taipan »

SH300s are notorious for corrosion on fork legs wheels and the rear wheel side mounting plate thing. The pros outweigh the cons on these though. Took mine to 88k and regret selling it to be honest as it was still going strong.

User avatar
horobags
Benefactor
Posts: 3953
Joined: Thu Aug 05, 2010 1:57 pm
Current Ride: RE 350 classic vision 110
Location: scruffy old mancfester

Re: Sh300i

Post by horobags »

I think also the euro 3 model is better than the new euro4 model with the tappety emissions valve that gets on your tits.
Im not a gynecologist, but I dont mind taking a look.

Symcity
Benefactor
Posts: 1216
Joined: Wed Jan 06, 2016 7:58 am
Current Ride: Honda SH300i
Location: Balloch Scotland

Re: Sh300i

Post by Symcity »

Nice one in Bob Minion at the moment

Symcity
Benefactor
Posts: 1216
Joined: Wed Jan 06, 2016 7:58 am
Current Ride: Honda SH300i
Location: Balloch Scotland

Re: Sh300i

Post by Symcity »

horobags wrote: Wed Oct 02, 2019 11:50 am I think also the euro 3 model is better than the new euro4 model with the tappety emissions valve that gets on your tits.
Mark - can you elaborate on this point - what is the difference between the two models

User avatar
horobags
Benefactor
Posts: 3953
Joined: Thu Aug 05, 2010 1:57 pm
Current Ride: RE 350 classic vision 110
Location: scruffy old mancfester

Re: Sh300i

Post by horobags »

The 2 euro 4 models I had both had a tappety /ticking noise, a lot of owners on the Italian F/B owners page also complained about it, a lot putting it down to valve clearance coming in as the engine warms up. . Honda Uk refused to accept is was a fault, but it drove me nuts. My honda dealer agreed to change it as he agreed with me. The second one did it as well. :shock: :?
Apparently its an emisions valve that was added to get through euro4 spec, Im sure it doesnt do any harm but I found it unacceptable.
The euro 4 was getting an indicated 92mpg though.
My current euro 3 seems much quieter and a little quicker than the E4 model, the SH is a great light scoot with great performance.
Im not a gynecologist, but I dont mind taking a look.

User avatar
smeghead
Benefactor
Posts: 2153
Joined: Wed Oct 24, 2012 2:58 am
Current Ride: GTS 300 Touring
Location: Doncaster

Re: Sh300i

Post by smeghead »


Post Reply