Hello, what do you use to break the bead with cause sometimes I really struggleBenR wrote:Fitted a new front tyre & front brake pads on the nexus.
What have you done to your Scooter today?
- Deeping
- Benefactor
- Posts: 1207
- Joined: Mon Aug 15, 2011 8:13 pm
- Current Ride: t-max + xv1100
- Location: Very South Lincolnshire
Re: What have you done to your Scooter today?
Never instal version 1.0
-
- Benefactor
- Posts: 1730
- Joined: Mon Apr 13, 2009 10:25 pm
- Current Ride: VespaGTS250 Wave110i
Re: What have you done to your Scooter today?
Removed rear wheel and had a puncture repaired by Watling tyres. Easy job removing wheel on Burgman 650, Even put some grease on the draw bolt, caliper threads and drive flange spindle, they use very little grease in the factories these days.
Honda NC750 Manual
VESPA GTS250
Royal Enfield HNTR 350
Honda Wave 110i
VESPA GTS250
Royal Enfield HNTR 350
Honda Wave 110i
- SpikeOne
- Posts: 686
- Joined: Wed Aug 11, 2010 5:43 pm
- Current Ride: Kymco Downtown 300i
- Location: Cheltenham
Re: What have you done to your Scooter today?
Grinned from ear to ear... 

Spike
Kymco Downtown 300i
Yamaha Vity
MZ ETZ251
Honda CD175
Honda CB250 G5
BSA Bantam D14/4
BSA Sunbeam
Honda C50
Kymco Downtown 300i
Yamaha Vity
MZ ETZ251
Honda CD175
Honda CB250 G5
BSA Bantam D14/4
BSA Sunbeam
Honda C50
- andyscooter
- Benefactor
- Posts: 913
- Joined: Sun Apr 12, 2009 10:27 am
- Current Ride: gilera runner vxr200
- Location: bromsgrove
Re: What have you done to your Scooter today?
ordereed some new rubber for it
i was an atheist until i realised i am god
Remember its a speed limit not a target
gilera runner vxr200 (chavped)
Remember its a speed limit not a target
gilera runner vxr200 (chavped)
- BenR
- Posts: 428
- Joined: Thu Mar 10, 2011 10:48 am
- Current Ride: Aprilia Atlantic sprint 500
- Location: South West
Re: What have you done to your Scooter today?
Deeping wrote:Hello, what do you use to break the bead with cause sometimes I really struggleBenR wrote:Fitted a new front tyre & front brake pads on the nexus.
I used a tyre machine mate much easier.

Re: What have you done to your Scooter today?
A method I've used in the past is to place the wheel under a car then use a jack to press the bead off.Deeping wrote:Hello, what do you use to break the bead with cause sometimes I really struggle
-
- Benefactor
- Posts: 136
- Joined: Thu Apr 09, 2009 6:27 pm
- Current Ride: Suzuki Burgman 400
- Location: Cliffe Woods, Kent
Re: What have you done to your Scooter today?
Well i went for a ride over to Essex this morning, up the A2 which has 4 lanes each way and then onto the M25 through the Dartford Tunnel and tolls, which are free on 2 wheels.
Have to say the Matrix behaved very well, easily sitting at around 50-55mph. Filled it up with a whole £6.23. and managed to get 92mpg out of the second tank, which is getting alot better.
Have to say the Matrix behaved very well, easily sitting at around 50-55mph. Filled it up with a whole £6.23. and managed to get 92mpg out of the second tank, which is getting alot better.
Mike,
Suzuki Burgman 400.
Gone, Honda Forza 300 Sinnis Matrix 2, Gilera GP 800, Piaggio Zip 50
Suzuki Burgman 400.
Gone, Honda Forza 300 Sinnis Matrix 2, Gilera GP 800, Piaggio Zip 50
- mightbesane
- Benefactor
- Posts: 287
- Joined: Thu Aug 18, 2011 7:41 pm
- Current Ride: Burgman 400 K4
- Location: Lehigh Valley, PA/Languedoc, France
Re: What have you done to your Scooter today?
Picked up my Burger from the shop yesterday after state inspection. Needed new tires - the Bridgestone on the rear was pretty well squared up but I thought the front was OK. Anyway, they let me order online and I got a good price on a pair of Michelin City Grips - less than 75 GBP delivered. Paid my money, turned out of the drive, and nearly fell over. The new rubber was sooo responsive when I leaned. If the Michelins last for a good while, I'll be really impressed.
-
- Posts: 77
- Joined: Tue Apr 17, 2012 2:25 pm
- Current Ride: Yamaha FJR1300AS
- Location: West London, UK
Re: What have you done to your Scooter today?
Rode to and from the office, managed to scrape the road with floor stand leaning it too far right on the Ewell (Esso) roundabout.
The damn engine warning light come back on for about 10 minutes (again) on the way home and the alarm stopped working a week ago.
Going in for it's second service tomorrow so will want all this stuff sorted out. Exhaust oxygen sensor replaced last time the engine warning light was coming on.
The damn engine warning light come back on for about 10 minutes (again) on the way home and the alarm stopped working a week ago.
Going in for it's second service tomorrow so will want all this stuff sorted out. Exhaust oxygen sensor replaced last time the engine warning light was coming on.
ex bikes:
Yamaha WR125X
Yamaha TMax 500 MK3
Yamaha XMax 250
Yamaha XMax 125
Honda PCX125 (hired)
Yamaha WR125X
Yamaha TMax 500 MK3
Yamaha XMax 250
Yamaha XMax 125
Honda PCX125 (hired)
-
- Benefactor
- Posts: 1730
- Joined: Mon Apr 13, 2009 10:25 pm
- Current Ride: VespaGTS250 Wave110i
Re: What have you done to your Scooter today?
Rode the Burgman 650 for the first time since buying a 125 Swing, 1500 miles ago, came back with the well known Burger grin, what a great bike, much better than I remembered it. Fast through twisties, good overtaking using the power button, good down the motorway using overdrive, great electric screen. I'm sure the newer scoots cannot beat it as an overall pagkage.
Honda NC750 Manual
VESPA GTS250
Royal Enfield HNTR 350
Honda Wave 110i
VESPA GTS250
Royal Enfield HNTR 350
Honda Wave 110i