Need more pie porn on muppets

Ordered a powerbronze air flow / bubble small sporty screen for the XMax the other day as it now on 'Fun Duties' rather than the commute...
hopefully will be delivered today so i can fit this eve... ready for the delights of the Essex run on sun 16th...
The std screen offers a fair bit of weather protection, but does make a lot of 'roar' in the helmet... hopefully this will be half way option for wind protection, and give a slightly sportier look
Won't be needing the weather protection, as Sunday is set Fair! - fingers crossed!
Fitted and looks great...

Err... Isn't the Essex run on Saturday 16th or has my calendar screwed up totally?

Checked water and oil looks new bit of a faff to take front cover off but couldn't see level of water thro inspection slot it's bottle has been over filled is reason radiator full as well .Had to kneel on bad knee had some foam down on floor .Happy now can fill it up and ride it .Tomorrow looking okay up here get me £600 worth of use out of it

Gave "Mr T" a quick wash and brush up and took him down for his MOT.
My local bike shop's under new management and the tester was chatting while he was doing the MOT, unlike the last one who made you take a walk while he did the test. I think I'll be giving them more business in future as the new owners are altogether friendlier and more personable. They seemed to think it a bit odd that I had a bike and a scooter though..
They've also got classics as well including a tasty MHR Ducati and a couple of Cucciolinos (motorised bicyles), a Morini Strada 350 etc.quite an interesting visit. Mr T passed of course..

Cookie wrote:Err... Isn't the Essex run on Saturday 16th or has my calendar screwed up totally?

Thanks for that... would of missed it!

Fixed a Bluetooth system in to my Skid lid.

190 mile return journey to the smoke for work.

Not my TMax, which is going like a Boeing, but my CBF600SA which was vibrating badly through the footrests.
Fitted a new mainshaft bearing and oil pump drive chain, checked clutch, camchain and starter gear.
Checked valve clearances and topped up with oil and coolant and bobs your builder, all running well again. Finally finished at 10:15 tonight. Knackered

Stripped the tmax down to the bare bones now the search for the problem of engine cutting out