Page 27 of 30
Re: 2013 Honda NSS300 Forza
Posted: Sat Aug 31, 2013 8:25 pm
by Normsthename
A valve check on the Forza should be really quick and easy I would think. After which, if adjustment is needed you can easily work out the size of the shims needed and pick them up from your dealer.
Depends on the engine and where the shims are located.
Some engines the shims are above the bucket and can be removed with a special tool.
Most engines these days have the shims under the buckets and the Camshafts need removing to get at them
Andy
Re: 2013 Honda NSS300 Forza
Posted: Sat Aug 31, 2013 8:54 pm
by tallpaul
MrGrumpy wrote:tallpaul wrote:Well after reading bornagainbikers post about there being one in Newcastle I decided to have a ride over today, I must say it looks nice in the flesh so to speak but having cocked my leg over & sitting on the forza it was too low and cramped for me, mind you I'm six-two & a bit, even the sale fella commented it looked a bit tight on the knees,
There were a couple of nc700's & an integra...I likee

Yeah I've seen comments in mags that they aren't designed for tall people. Tillstons in Stockton have one in, and they do look quite small. Maybe designed by Thai designers for the average Thai person!
Integra? Hmmm - they look quite nice but a scooter you can't step through, that has no luggage space and has chain drive still doesn't make any sense to me!
Yes I know Mr G, I just liked the look of it. I'm to practical minded really ...I'd miss the amout of junk I could throw in my trunk

Re: 2013 Honda NSS300 Forza
Posted: Sat Aug 31, 2013 9:23 pm
by gn2
tallpaul wrote:existing forzas over in Spain & Europe ..and it having an auto gearbox instead of cvt, this was news to him

..

News to me too.
The previous Forzas had a CVT with a fancy control unit.
http://world.honda.com/motorcycle-techn ... ic/p1.html" onclick="window.open(this.href);return false;
Re: 2013 Honda NSS300 Forza
Posted: Sat Aug 31, 2013 11:14 pm
by gn2
Normsthename wrote:Most engines these days have the shims under the buckets and the Camshafts need removing to get at them
Andy
The Forza has a single cam and it looks like forked rockers.
With any luck it will be quick and easy to get at the shims without having to disassemble the cam.
Re: 2013 Honda NSS300 Forza
Posted: Sun Sep 01, 2013 12:15 am
by tallpaul
gn2 wrote:tallpaul wrote:existing forzas over in Spain & Europe ..and it having an auto gearbox instead of cvt, this was news to him

..

News to me too.
The previous Forzas had a CVT with a fancy control unit.
http://world.honda.com/motorcycle-techn ... ic/p1.html" onclick="window.open(this.href);return false;
Oops

the way I'd read it & understood the write up on the old forza when they introduced the new one was wrong, may I take my foot outa my mouth now?

Re: 2013 Honda NSS300 Forza
Posted: Sun Sep 01, 2013 9:29 am
by Data
gn2 wrote:Normsthename wrote:Most engines these days have the shims under the buckets and the Camshafts need removing to get at them
Andy
The Forza has a single cam and it looks like forked rockers.
With any luck it will be quick and easy to get at the shims without having to disassemble the cam.
That's handy if it is. My Burgman, like most bike engines, has to have both the cams removed. It's easy but it's obviously more time consuming than being able to do it without removing the camshaft.
Re: 2013 Honda NSS300 Forza
Posted: Sun Sep 01, 2013 4:05 pm
by MrGrumpy
gn2 wrote:tallpaul wrote:existing forzas over in Spain & Europe ..and it having an auto gearbox instead of cvt, this was news to him

..

News to me too.
The previous Forzas had a CVT with a fancy control unit.
http://world.honda.com/motorcycle-techn ... ic/p1.html" onclick="window.open(this.href);return false;
Yeah...one of the things ditched in order to cut costs...along with being built in Thailand
Re: 2013 Honda NSS300 Forza
Posted: Sun Sep 01, 2013 7:45 pm
by gn2
Cutting costs is a good thing.
As is removing the nintendomatic gearbox.
Re: 2013 Honda NSS300 Forza
Posted: Sun Sep 01, 2013 8:06 pm
by MrGrumpy
gn2 wrote:Cutting costs is a good thing.
As is removing the nintendomatic gearbox.
No...I love superfluously complicated technology!
Re: 2013 Honda NSS300 Forza
Posted: Sun Sep 01, 2013 8:08 pm
by gn2
Me too, so long as it does something genuinely useful.