Daelim 250 S3 Advance
-
- Posts: 165
- Joined: Mon May 19, 2014 9:11 pm
- Current Ride: SYM MAXSYM 400
- Location: Lincoln
Re: Daelim 250 S3 Advance
Very nice, smart looking machine, especially in white, Phil
soulofreiki.com
- bornagainbiker
- Posts: 880
- Joined: Sun Jan 29, 2012 7:53 pm
- Current Ride: Honda Forza 300
- Location: Newcastle upon Tyne, UK
- Contact:
Re: Daelim 250 S3 Advance
Re GN2s question from another Daelim thread. I wanted my answer and these photos on my main Daelim thread.gn2 wrote:Is that a flipfront lid that doesn't fit?
My medium full face flip fits inside for width but the seat will not close.
my LS2 FF393 Convert will not fit for width due to the helmet chin guard construction. I have tried all combinations and several helmets and only my visored open face fits fully.






Riding a Daelim S3 Advance 250, Piaggio Fly 125 3v
- bornagainbiker
- Posts: 880
- Joined: Sun Jan 29, 2012 7:53 pm
- Current Ride: Honda Forza 300
- Location: Newcastle upon Tyne, UK
- Contact:
Re: Daelim 250 S3 Advance
Latest fuel fill up 89.6 mpg, best so far even after regularly opening her up to 7k revs max and a one off clock indicated 140kph with still some throttle left. 
Riding a Daelim S3 Advance 250, Piaggio Fly 125 3v

Riding a Daelim S3 Advance 250, Piaggio Fly 125 3v
- bornagainbiker
- Posts: 880
- Joined: Sun Jan 29, 2012 7:53 pm
- Current Ride: Honda Forza 300
- Location: Newcastle upon Tyne, UK
- Contact:
Re: Daelim 250 S3 Advance
Mpg is improving even more than I anticipated with yesterdays fill up at an astonishing 98.0, giving a current average of 90.3
-
- Benefactor
- Posts: 1695
- Joined: Tue Mar 24, 2009 10:26 pm
- Current Ride: 450 Guerrilla
- Globs
- Posts: 1557
- Joined: Wed Oct 03, 2012 12:13 am
- Current Ride: Piaggio X10 350
Re: Daelim 250 S3 Advance
That's stunning performance and economy!
My SYM GTS300 had exactly the same issue with the helmet not fitting underneath, and it's not a large helmet either.
What I did is used a Fein Multitool (Bosch also do them!) to cut a hole in the plastic and slipped in some black vinyl to disguise it. The Pillion comfort is unaffected and my lid just fits in fine now - it's a win-win.
Find out where it needs cutting with blobs of Blutak or plasticine.
When I remember (and look at the bike again!) I'll post of a picture.
My SYM GTS300 had exactly the same issue with the helmet not fitting underneath, and it's not a large helmet either.
What I did is used a Fein Multitool (Bosch also do them!) to cut a hole in the plastic and slipped in some black vinyl to disguise it. The Pillion comfort is unaffected and my lid just fits in fine now - it's a win-win.
Find out where it needs cutting with blobs of Blutak or plasticine.
When I remember (and look at the bike again!) I'll post of a picture.
-
- Posts: 28
- Joined: Thu Nov 04, 2010 3:47 pm
- Current Ride: Honda Forza 300
- Location: Suffolk
Re: Daelim 250 S3 Advance
Nice looking machine, I'm trying to source one at the moment.....I take it that the bike is still running well?
The nearest dealer to me is in King Lynn and I spoke to them yesterday but they seemed vague about colours and general information about the scoot, can anyone recommend a good dealer?
The nearest dealer to me is in King Lynn and I spoke to them yesterday but they seemed vague about colours and general information about the scoot, can anyone recommend a good dealer?
- bornagainbiker
- Posts: 880
- Joined: Sun Jan 29, 2012 7:53 pm
- Current Ride: Honda Forza 300
- Location: Newcastle upon Tyne, UK
- Contact:
Re: Daelim 250 S3 Advance
Over 1100 happy trouble free miles. I'm to believe the current colours are white, black and my colour metallic grey.
This forum is the place for most info, just ask.
This forum is the place for most info, just ask.
-
- Benefactor
- Posts: 741
- Joined: Sat Mar 22, 2014 4:17 pm
- Current Ride: 2023 Forza 350 YamT7
- Location: Devon
Re: Daelim 250 S3 Advance
GT's of Plymouth have a used but nearly new S3 Advance in black, in their showroom, nestled amongst their newly appointed Kymco franchise scoots.stordz wrote:Nice looking machine, I'm trying to source one at the moment.....I take it that the bike is still running well?
The nearest dealer to me is in King Lynn and I spoke to them yesterday but they seemed vague about colours and general information about the scoot, can anyone recommend a good dealer?
It's been there for a month or so at £2999.
Tim
-
- Posts: 28
- Joined: Thu Nov 04, 2010 3:47 pm
- Current Ride: Honda Forza 300
- Location: Suffolk
Re: Daelim 250 S3 Advance
Thanks for the information, I decided to go with the safe bet and bought a ultra low mileage Honda 2013 ex demo Forza instead due to concerns about support and service.Capt. R Swipe wrote:GT's of Plymouth have a used but nearly new S3 Advance in black, in their showroom, nestled amongst their newly appointed Kymco franchise scoots.stordz wrote:Nice looking machine, I'm trying to source one at the moment.....I take it that the bike is still running well?
The nearest dealer to me is in King Lynn and I spoke to them yesterday but they seemed vague about colours and general information about the scoot, can anyone recommend a good dealer?
It's been there for a month or so at £2999.
Tim
My local Honda dealer is only a mile down the road which is just as well as the bike started leaking oil / water onto my driveway one week into my ownership... hopefully I should get it back next week.....