Meeting Lyn at cafe 1030 for breaky if anyone not working and fancies it .

Yay breakkie

Hey Lyn, if there's time can you see if you have a bit of ally' 120 mm (ish) x 50 mm (ish) x 20 mm (a bit thicker will be ok) please, I really should finish off the walnut cracker I started making last year if you got something about that size message me what I owe you bud

The Bern wrote:Yay breakkie

Hey Lyn, if there's time can you see if you have a bit of ally' 120 mm (ish) x 50 mm (ish) x 20 mm (a bit thicker will be ok) please, I really should finish off the walnut cracker I started making last year if you got something about that size message me what I owe you bud

Buddy Ekk! i forgot all about it SORRY, that was months ago will check in a bit when making Julian's spacer...
Hissing down here rain hale wind....tis the end of the world

Will try to make this if its not issing down are you going Bern?

Weather forcast good for Whitchurch partly sunny

The Bern wrote:Yay breakkie

Hey Lyn, if there's time can you see if you have a bit of ally' 120 mm (ish) x 50 mm (ish) x 20 mm (a bit thicker will be ok) please, I really should finish off the walnut cracker I started making last year if you got something about that size message me what I owe you bud

Carved a lump of Ali down to size for you, left it a tiny bit over on length and height so you can get the milling marks out...only had a 3/8 roughing cutter as i had to take 3/4 off it.
Lyn. Ow! it's around 123mmx50x20.3...

Pjfdinosaur wrote:Will try to make this if its not issing down are you going Bern?

Yes Phil you wanna come here for a cuppa before heading off bud ?

kayz1 wrote:

The Bern wrote:Yay breakkie

Hey Lyn, if there's time can you see if you have a bit of ally' 120 mm (ish) x 50 mm (ish) x 20 mm (a bit thicker will be ok) please, I really should finish off the walnut cracker I started making last year if you got something about that size message me what I owe you bud

Carved a lump of Ali down to size for you, left it a tiny bit over on length and height so you can get the milling marks out...only had a 3/8 roughing cutter as i had to take 3/4 off it.
Lyn. Ow! it's around 123mmx50x20.3...

Cheers bud

Sorry Julian, working but hope to catch up with you soon

No problem Alan unfortunately can't come to air ambulance run now as have Vespa Black Country meet same day.