Center Stand Sensor
Posted: Sat Feb 24, 2018 4:32 pm
The 650 Burgman would’nt change gear this morning in manual or automatic,it happened just before Christmas as well when i was about to get a new tyre,got my breakdown service out,but the fault had rectified itself,so the recovery man followed me for a couple of miles to check all was well then went on to his next job,when i got to the dealer i told them,they had a look at the stand cleaned around around the sensor and regeased the area,the same thing happened a couple of weeks ago,i wiggled the stand a bit and resolved the fault,but once again it happened this morning,lots of wiggling,but still no joy dont really know where the sensor is,had a gander underneath,but being a non-machanical buffoon,i have no idea what i am looking for,some kind of plunger i guess that when the stand is in the up position allows the engine to change gear.
I phoned my dealer and was lucky enough to get a sensible member of staff(i hope), and explained my problem,he went into my account and could see i had already paid for work to be done on the Burgman,so they have raised a job number and i called out my recovery service.The Burgman is still under warranty and he said it could be a faulty switch or possibly the stand may of moved from its fixing point,obviously if its shitted up again it’ll be an easy fix,but is going to be a reoccurrence,on my previous 650 Burgmans i’ve not had this problem and one of them was the new shaped one,i clean the scooter on a regular basis,but dont want to get involved in removing centerstands and regreasing etc,clearly they wont be able to take a look till Monday at the earliest.
Will update when i know more
Steve
I phoned my dealer and was lucky enough to get a sensible member of staff(i hope), and explained my problem,he went into my account and could see i had already paid for work to be done on the Burgman,so they have raised a job number and i called out my recovery service.The Burgman is still under warranty and he said it could be a faulty switch or possibly the stand may of moved from its fixing point,obviously if its shitted up again it’ll be an easy fix,but is going to be a reoccurrence,on my previous 650 Burgmans i’ve not had this problem and one of them was the new shaped one,i clean the scooter on a regular basis,but dont want to get involved in removing centerstands and regreasing etc,clearly they wont be able to take a look till Monday at the earliest.
Will update when i know more
Steve