Xmax 300 tyre pressure

Chat about all makes of Maxi scoot here!
Post Reply
lenny
Posts: 57
Joined: Wed Mar 21, 2018 10:05 am
Current Ride: Honda Forza 350

Xmax 300 tyre pressure

Post by lenny »

I check tyre pressures at least once a week, the first few times set to handbook recommendations. Then for some reason, possibly age related, I reverted to 36/42 psi, the same as my last 4 bikes. Now at 4500 miles the centre rear tread is down to 2mm and I felt slight disappointment with the wear rate. A little bit of anger and a bit more embarrassment, still at 66, I'm still not too old to learn lessons. :oops:

rayb
Benefactor
Posts: 990
Joined: Wed Nov 22, 2017 1:16 pm
Current Ride: Honda SH300
Location: Droitwich
Contact:

Re: Xmax 300 tyre pressure

Post by rayb »

I'm no expert but I looked at the recommended pressure and it says 29psi. If you have it at 42psi then there's likely to be less contact with the road and consequently more wear.

66, a positive youngster

User avatar
StephenC
Benefactor
Posts: 2624
Joined: Sun Apr 12, 2009 12:24 pm
Current Ride: Kymco DT X360
Location: Essex

Re: Xmax 300 tyre pressure

Post by StephenC »

Difficult for me to comment on wear rate as I fitted winter tyres but over-inflation generally leads to wear on the centre :(

I can tell you about the brake pads though - just having the fronts replaced at 5500 miles. I commute into central London so I would guess that might count as heavy use?
Expert in Close Quarters Combat Filtering
Can is not the same as Should

Post Reply