Page 1 of 5
Burgman 650 K3 parts required
Posted: Mon Dec 16, 2019 11:57 pm
by cd1974uk
Hi all,
I have recently acquired an early Burgman 650 K3 with low miles. This scoot is rough to say the least and I require most plastics, a wiring loom, lock set, a CVT ECU and probably a bit more.
If any of you have any bits that you want to sell I would much appreciate it.
Thanks in advance.
Re: Burgman 650 K3 parts required
Posted: Tue Dec 17, 2019 2:54 pm
by Snail
Hi, you may get a better response on burgman riders uk forum ? There has been ads for breaking 650,s in last couple of months
Re: Burgman 650 K3 parts required
Posted: Wed Dec 25, 2019 9:46 am
by cd1974uk
Hi again,
Thanks for the advice, I’ve been looking for said forum but can’t find it? Any chance of a link?
Thanks
Re: Burgman 650 K3 parts required
Posted: Wed Dec 25, 2019 1:04 pm
by Snail
Hi, sorry should of said, it's a Facebook group, Burgman Riders UK. Muppets have Facebook group as well, they seems to be more posts on these
There is a internet group but its mainly USA based
Hope that helps
Re: Burgman 650 K3 parts required
Posted: Wed Dec 25, 2019 4:46 pm
by cd1974uk
That’s great except I don’t do Facebook.
I require mainly body panels, pretty much a complete set. Also lock set including ignition switch. There are many other smal bits too, the bike should technically be scrap but it has s not in my nature to let this happen....
Any help would be greatly received.
Many thanks.
Re: Burgman 650 K3 parts required
Posted: Thu Dec 26, 2019 11:34 am
by muddyfox
Quick Google search produced this
https://www.bike-parts-suz.com/suzuki-m ... 5110/C/121
Combine that with eBay and you should be ok. Keep us updated.
Re: Burgman 650 K3 parts required
Posted: Thu Dec 26, 2019 2:00 pm
by Snail
Fowlers of Bristol are supposed to have a good mail order service for parts, not tried them myself?
Re: Burgman 650 K3 parts required
Posted: Fri Dec 27, 2019 6:12 pm
by cd1974uk
Hi again chaps.
Thanks for all of your input. I personally use CMSNL for all of my part numbers for my bikes.
Obviously main dealer new prices are prohibitively expensive, especially when considering what a turd my bike is. I wouldn’t hesitate to use them for small components like clips and screws etc as they provide excellent service, I’ve had many small parts for my VFR from them.
Someone breaking one of these earlier 650s is what I’m after. I am willing to do a group purchase on the parts as required.
Many thanks.
Re: Burgman 650 K3 parts required
Posted: Tue Dec 31, 2019 2:29 pm
by Deleted User 7077
Theres one on facebook marketplace breaking for spares just seen .
Re: Burgman 650 K3 parts required
Posted: Wed Jan 08, 2020 11:02 pm
by cd1974uk
Would someone be so kind as to PM the details such as phone no or email please.