Forza screen
- Argyll
- Benefactor
- Posts: 189
- Joined: Tue May 08, 2012 5:56 am
- Current Ride: SH300i
- Location: SW Scotland
Re: Forza screen
The Shad brackets for the Forza 125 fit the new 300. I actually see the 300 listed now with the same part number. I can't think why you couldn't fit a Givi base plate to the Shad brackets - it's just 4 bolts.
- Argyll
- Benefactor
- Posts: 189
- Joined: Tue May 08, 2012 5:56 am
- Current Ride: SH300i
- Location: SW Scotland
Re: Forza screen
Here's my Shad base plate.
-
- Posts: 485
- Joined: Sat Aug 11, 2018 12:55 pm
Re: Forza screen
Bern wrote: ↑Mon Dec 10, 2018 2:51 pmYep, this what Lyn used then fitted mounting plate to it .......... https://www.ebay.co.uk/itm/202514555866
-
- Benefactor
- Posts: 106
- Joined: Fri Apr 10, 2015 3:59 pm
- Current Ride: Vespa GTS 300
- Location: Lake District.
Re: Forza screen
Horobags- I spoke to Givi at NEC looking at top boxes for my new Forza. You need to check this but my scribbled notes indicate that an SR1166 bracket could be used with a base plate M5M or M6M to support a monokey box. I was specifically looking at the E300N3 top box, it being big enough for my crash helmet, but not out of proportion to the bike.
Will get one later in the year for holidays.
Hope this helps. Information available on givi.co.uk website.
EDIT - looking on line , the M5M and M6M base plates seem to be for monolock boxes, not monokey.
Will get one later in the year for holidays.
Hope this helps. Information available on givi.co.uk website.
EDIT - looking on line , the M5M and M6M base plates seem to be for monolock boxes, not monokey.
- horobags
- Benefactor
- Posts: 3961
- Joined: Thu Aug 05, 2010 1:57 pm
- Current Ride: RE 350 classic vision 110
- Location: scruffy old mancfester
Re: Forza screen
Thanks Bern, and Scootles,and Argyll.
Im not a gynecologist, but I dont mind taking a look.
- Argyll
- Benefactor
- Posts: 189
- Joined: Tue May 08, 2012 5:56 am
- Current Ride: SH300i
- Location: SW Scotland
Re: Forza screen
There will be, I believe, a £100 price increase on the Forza 300 in January, plus the free Tracker deal expires at the end of December (not sure if it will be renewed). Might be of interest to anyone looking at the moment.
-
- Benefactor
- Posts: 106
- Joined: Fri Apr 10, 2015 3:59 pm
- Current Ride: Vespa GTS 300
- Location: Lake District.
Re: Forza screen
Mine too is the blue model, and very nice too.
As for screens and boxes, I'm moving towards an MRA extension which, coupled with the electric screen, should give me the adjustment I need.
For the box I'll get the givi bracket and see if I can fit my old BMW case. If not I'll get a Givi box.
Thanks for all the input so far.
As for screens and boxes, I'm moving towards an MRA extension which, coupled with the electric screen, should give me the adjustment I need.
For the box I'll get the givi bracket and see if I can fit my old BMW case. If not I'll get a Givi box.
Thanks for all the input so far.
-
- Benefactor
- Posts: 1216
- Joined: Wed Jan 06, 2016 7:58 am
- Current Ride: Honda SH300i
- Location: Balloch Scotland
Re: Forza screen
With the value of sterling going down the tubes I’m surprised that only a £100 pound price increase shall be imposed in January
-
- Benefactor
- Posts: 106
- Joined: Fri Apr 10, 2015 3:59 pm
- Current Ride: Vespa GTS 300
- Location: Lake District.
Re: Forza screen
Well, I fitted a screen extension - the MRA VSA type A. Only done one trip out so I think I have a bit more adjusting to do. At 5'10" I'm running it at full height and it seems OK. Not fantastic, but today was all side winds, so things were a bit distorted. It is certainly better than the original screen alone. What I have noticed is that the screen seems to flex a bit more when I hit a bump, presumably because of the added weight of the extension. I found myself running the electric screen to bottom height on potholed back roads to reduce flex - but that's OK because speeds are low. I run the screen high on a smoother open road.
- Argyll
- Benefactor
- Posts: 189
- Joined: Tue May 08, 2012 5:56 am
- Current Ride: SH300i
- Location: SW Scotland
Re: Forza screen
That's a fairly common experience with most screen attachments. The effect is probably accentuated by your eye being drawn to the more obvious movement at the top which normally goes unobserved. The Forza screen is relatively small so I doubt that the MRA extension will cause undue stress, but it will, no doubt, become annoying