Hi all,
I have recently acquired an early Burgman 650 K3 with low miles. This scoot is rough to say the least and I require most plastics, a wiring loom, lock set, a CVT ECU and probably a bit more.
If any of you have any bits that you want to sell I would much appreciate it.
Thanks in advance.
Burgman 650 K3 parts required
-
- Posts: 19
- Joined: Thu Mar 24, 2011 1:57 pm
- Current Ride: AN650
Burgman 650 K3 parts required
If it looks like a duck, quacks like a duck, then it probably is a duck!
-
- Posts: 326
- Joined: Tue Oct 03, 2017 2:51 pm
- Current Ride: Burgman
- Location: Gloucester
Re: Burgman 650 K3 parts required
Hi, you may get a better response on burgman riders uk forum ? There has been ads for breaking 650,s in last couple of months
-
- Posts: 19
- Joined: Thu Mar 24, 2011 1:57 pm
- Current Ride: AN650
Re: Burgman 650 K3 parts required
Hi again,
Thanks for the advice, I’ve been looking for said forum but can’t find it? Any chance of a link?
Thanks
Thanks for the advice, I’ve been looking for said forum but can’t find it? Any chance of a link?
Thanks
If it looks like a duck, quacks like a duck, then it probably is a duck!
-
- Posts: 326
- Joined: Tue Oct 03, 2017 2:51 pm
- Current Ride: Burgman
- Location: Gloucester
Re: Burgman 650 K3 parts required
Hi, sorry should of said, it's a Facebook group, Burgman Riders UK. Muppets have Facebook group as well, they seems to be more posts on these
There is a internet group but its mainly USA based
Hope that helps
There is a internet group but its mainly USA based
Hope that helps
-
- Posts: 19
- Joined: Thu Mar 24, 2011 1:57 pm
- Current Ride: AN650
Re: Burgman 650 K3 parts required
That’s great except I don’t do Facebook.
I require mainly body panels, pretty much a complete set. Also lock set including ignition switch. There are many other smal bits too, the bike should technically be scrap but it has s not in my nature to let this happen....
Any help would be greatly received.
Many thanks.
I require mainly body panels, pretty much a complete set. Also lock set including ignition switch. There are many other smal bits too, the bike should technically be scrap but it has s not in my nature to let this happen....
Any help would be greatly received.
Many thanks.
If it looks like a duck, quacks like a duck, then it probably is a duck!
- muddyfox
- Benefactor
- Posts: 996
- Joined: Wed Feb 11, 2015 5:19 pm
- Current Ride: Yamaha 250r x max
- Location: Nottingham
Re: Burgman 650 K3 parts required
Quick Google search produced this
https://www.bike-parts-suz.com/suzuki-m ... 5110/C/121
Combine that with eBay and you should be ok. Keep us updated.
https://www.bike-parts-suz.com/suzuki-m ... 5110/C/121
Combine that with eBay and you should be ok. Keep us updated.
Muddyfox (Nottingham)
Ride safe
Ride safe
-
- Posts: 326
- Joined: Tue Oct 03, 2017 2:51 pm
- Current Ride: Burgman
- Location: Gloucester
Re: Burgman 650 K3 parts required
Fowlers of Bristol are supposed to have a good mail order service for parts, not tried them myself?
-
- Posts: 19
- Joined: Thu Mar 24, 2011 1:57 pm
- Current Ride: AN650
Re: Burgman 650 K3 parts required
Hi again chaps.
Thanks for all of your input. I personally use CMSNL for all of my part numbers for my bikes.
Obviously main dealer new prices are prohibitively expensive, especially when considering what a turd my bike is. I wouldn’t hesitate to use them for small components like clips and screws etc as they provide excellent service, I’ve had many small parts for my VFR from them.
Someone breaking one of these earlier 650s is what I’m after. I am willing to do a group purchase on the parts as required.
Many thanks.
Thanks for all of your input. I personally use CMSNL for all of my part numbers for my bikes.
Obviously main dealer new prices are prohibitively expensive, especially when considering what a turd my bike is. I wouldn’t hesitate to use them for small components like clips and screws etc as they provide excellent service, I’ve had many small parts for my VFR from them.
Someone breaking one of these earlier 650s is what I’m after. I am willing to do a group purchase on the parts as required.
Many thanks.
If it looks like a duck, quacks like a duck, then it probably is a duck!
Re: Burgman 650 K3 parts required
Theres one on facebook marketplace breaking for spares just seen .
-
- Posts: 19
- Joined: Thu Mar 24, 2011 1:57 pm
- Current Ride: AN650
Re: Burgman 650 K3 parts required
Would someone be so kind as to PM the details such as phone no or email please.
If it looks like a duck, quacks like a duck, then it probably is a duck!