year model

A whole section dedicated to the Suzuki Burgman
Post Reply
pppe100

year model

Post by pppe100 »

hi all i am trying to define which 400 burgman i have it is a 400 single front disc model k6 but there are various models within this catagory can anyone define which it is regards p

User avatar
Data
Benefactor
Posts: 3312
Joined: Wed Feb 08, 2012 12:43 pm
Current Ride: Royal Enfield 350 Meteor
Location: Starfleet Command, North Essex Branch, UK

Re: year model

Post by Data »

Welcome to the site pppe100.

Your bike will be an AN400K6 fuel injected model. I don't think there were any other variants of that bike supplied over here in the UK. In the States it was supplied as a sport 'S' model also, with cut down screen and bare handlebars in chrome, no plastic covers on them. It looked good but really needed a bigger screen to keep the wind off as the 400 Burgmans can cruise at quite a high speed and the resultant blast of wind kills you on a big run. The single disc up front is quite good but not quite so happy at repeated hard stops when fully loaded before fade sets in. Not uncommon for any single disc bike however. The engine's actual size, as you may know, is 385cc as against 399cc for the 2007 model Burgmans onwards. Your machine has a different headlight setup to the latest bikes and the frame is different along with most other bits of the bike being changed on the later models in 2007. But it is non the less very good anyway. Overall it's a great bike. Enjoy!
Probably not ugly enough for the 'Ugly Bunch'! :lol:

Been riding for 55 years & owned too many bikes to list here...

michaelphillips
Benefactor
Posts: 4898
Joined: Fri Aug 24, 2012 9:14 pm
Current Ride: Daelim S250 Advance
Location: orpington kent

Re: year model

Post by michaelphillips »

I cant seem to remember.. I don't know where I'm going, but I'm on my way.

pppe100

Re: year model

Post by pppe100 »

thanks for all that it is that i saw on a spares site two different engine model no so just was curious as to which i have so that when ordering spares i dont make a mistake just knocked of stripping engine ,it has a big end or other problem just come in to check how to get timing chain off thanks for ur help regards p

Post Reply