Oh bugger!

Chat about all makes of Maxi scoot here!
User avatar
Sgt Ernie Bilko
Benefactor
Posts: 237
Joined: Tue Aug 04, 2009 10:28 am
Current Ride: 2010 Tmax mk 3
Location: West Midlands
Contact:

Oh bugger!

Post by Sgt Ernie Bilko »

Vespa GTS250 flew home tonight at a steady 75mph... humming along nicely and showing no apparent problems. Parked her up to return ten minutes later to a huge pool of coolant dripping from the engine mounting area. No visible split pipes, but the coolant level is below minimum... :(

Might be a head gasket but no option but to top up and limp it into work tomorrow... looks like the Smart car aka Thunderbird 4 will be called into action!
Master Sgt E Bilko
RA15042699
Co B 3rd Platoon

monty9120
Posts: 337
Joined: Sun Apr 12, 2009 8:11 pm

Re: Oh bugger!

Post by monty9120 »

hope its nothing serious mate. see if your mechanic can have a look.

there normally bullet proof so hope its a loose pipe or something
GILERA NEXUS 250

User avatar
R1K SU
Posts: 508
Joined: Wed Jun 22, 2011 12:44 pm
Current Ride: Burgman 650
Location: Thornton-Cleveleys, Lancs

Re: Oh bugger!

Post by R1K SU »

I know im prob way off but didnt Gillera GP800's have a problem with water hoses comming off, just all owned by same company, same people may make them ??
Yam RD350 YPVS
Honda VFR750
Yam RD 350 air
Kawa GT550
Kawa ZZR600
Yam FZ1s
Burgman 650
Honda VFR 1200 DCT....ecu Flashed
Suzuki GSXS1000
Suzuki GSXR1000 K7 😜😜
Zero FXS

User avatar
johnp
Benefactor
Posts: 2463
Joined: Mon Mar 23, 2009 9:20 pm
Current Ride: The Wife
Location: Barnet

Re: Oh bugger!

Post by johnp »

If it didn't have problems it wouldn't be italian. :D
Barnfields Plumbing & Property Services

Image

User avatar
masterchop
Posts: 390
Joined: Fri Jun 19, 2009 12:19 am
Current Ride: Burgman K3 400
Location: Portsmouth

Re: Oh bugger!

Post by masterchop »

sorry to hear that. can you visably see the pipes on the GT?
Single cylinder rumbler

hatter
Benefactor
Posts: 75
Joined: Mon Apr 20, 2009 10:03 pm
Current Ride: Honda SH 300

Re: Oh bugger!

Post by hatter »

Did you put in on side stand after your blast? If so coolant could have meerly just expanded out of overflow when hot and scoot at angle.
Had this happen to me once and thought the worst, worth checking.

User avatar
Sgt Ernie Bilko
Benefactor
Posts: 237
Joined: Tue Aug 04, 2009 10:28 am
Current Ride: 2010 Tmax mk 3
Location: West Midlands
Contact:

Re: Oh bugger!

Post by Sgt Ernie Bilko »

hatter wrote:Did you put in on side stand after your blast? If so coolant could have meerly just expanded out of overflow when hot and scoot at angle.
Had this happen to me once and thought the worst, worth checking.
Nope. Always on the centrestand. I hate those bloody springy suicide stands... I have taken the seat bucket out to check the pipes but all looks dry.... my teccy thinks gasket. Will let you all know tomorrow.... shitting-it.gif
Master Sgt E Bilko
RA15042699
Co B 3rd Platoon

barryG
Benefactor
Posts: 717
Joined: Mon Apr 13, 2009 11:11 am
Current Ride: Vespa GTS 300 SS

Re: Oh bugger!

Post by barryG »

Usually water comes out of the pipes where they go into the waterpump, they have naff clips which youjust remove and replace with jubilee clips and a little sealant.

User avatar
Sgt Ernie Bilko
Benefactor
Posts: 237
Joined: Tue Aug 04, 2009 10:28 am
Current Ride: 2010 Tmax mk 3
Location: West Midlands
Contact:

Re: Oh bugger!

Post by Sgt Ernie Bilko »

barryG wrote:Usually water comes out of the pipes where they go into the waterpump, they have naff clips which youjust remove and replace with jubilee clips and a little sealant.
Not that easy Barry. :( Limped it into work this morning. Closer inspection has revealed a pin hole in the barrel. An expense I can't afford....
Master Sgt E Bilko
RA15042699
Co B 3rd Platoon

barryG
Benefactor
Posts: 717
Joined: Mon Apr 13, 2009 11:11 am
Current Ride: Vespa GTS 300 SS

Re: Oh bugger!

Post by barryG »

Blimey, thats weird eh? It shouldnt happen on such a new scoot unless its been run without coolant for ages. Id say a bit of poor quality control is to blame?

Post Reply